R&S RTO6 - Page 1783

Remote control commands
R&S
®
RTO6
1783User Manual 1801.6687.02 ─ 05
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:CMSB:RESult<n>:CELL<o>:STOP?
Returns the end time of the selected cell.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
<o> *
Selects the cell.
Return values:
<Stop> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:CMSB:RESult<n>:CELL<o>:STATe?
Returns the state of the cell.
Suffix:
<m>
.
1..4
<n> *
<o> *
Return values:
<State> OK | LENGth | UNKNown | INComplete | CRC | PARity
OK
No error detected
LENGth
The length error indicates that the cell ended prematurely
. The
amount of bits that the software expected (based upon the
user's frame description) was not found before the cell was ter-
minated. This might occur because a new frame synchronized,
or a gap appeared between the bits.
UNKNown
Unknown error
Protocols