R&S RTO6 - Page 19

Preface
R&S
®
RTO6
19User Manual 1801.6687.02 ─ 05
User manual (Instrument)
Describes all instrument functions in detail. It also provides an introduction to remote
control, a complete description of the remote control commands with programming
examples, and information on maintenance and instrument interfaces. Includes the
contents of the getting started manual.
The online version of the user manual provides the complete contents for immediate
display on the internet.
Manuals for compliance test options
For compliance test options, extra test procedure manuals are available. Test fixtures
are described in printed manuals, which are delivered with the fixture.
●
The following test procedure manuals are available:
–
USB 2.0 Compliance Test Procedures
– Ethernet Compliance Tests Procedures
– MIPI D-PHY Compliance Tests Procedures
– eMMC Compliance Tests Procedures
– PCIe Compliance Tests Procedures
– DDR3 Compliance Tests Procedures
– ScopeSuite Automation
●
The following test fixture manuals are available:
– R&S RT-ZF1 USB 2.0 Compliance Test Fixture Set
– R&S RT-ZF2 Ethernet Compliance Test Fixture Set
– R&S RT-ZF3 Frequency Converter Board (100BASE-T1)
– R&S RT-ZF4 10BASE-Te Test Fixture
– R&S RT-ZF5 Ethernet Probing Fixture
– R&S RT-ZF6 Frequency Converter Board (1000BASE-T1)
– R&S RT-ZF7 Automotive Ethernet T&D Fixture
– R&S RT-ZF7A and R&S RT-ZF7P SMA Adaptors
– R&S RT-ZF8 Automotive Ethernet Compliance Test Fixture
Safety instructions
Provides safety information in many languages. The printed document is delivered with
the product.
Instrument security procedures manual
Deals with security issues when working with the R&S R
TO6 in secure areas. It is
available for download on the internet.
Service Manual
Describes the performance test for checking the rated specifications, module replace-
ment, firmware update, troubleshooting and fault elimination, and contains mechanical
drawings and spare part lists. The service manual is available for registered users on
Documentation overview