R&S RTO6 - Page 1978

Remote control commands
R&S
®
RTO6
1978User Manual 1801.6687.02 ─ 05
Parameters:
<DataIndexMin> Range: 1 to 32
Increment: 1
*RST: 1
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MILStd:DATA:IMAX <SearchName>,<DataIndexMax>
SEARch:TRIGger:MILStd:DAT
A:IMAX? <SearchName>
Sets the end value of a data word series index range if the operator is set to INRange.
Parameters:
<DataIndexMax> Range: 1 to 32
Increment: 1
*RST: 32
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MILStd:CMD:TR <SearchName>,<TRFlag>
SEARch:TRIGger:MILStd:CMD:TR? <SearchName>
Searches for a transmission mode.
Parameters:
<TRFlag> ONE | ZERO | DC
*RST: DC
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MILStd:ERRor:MANChester <SearchName>,<ManCodingError>
SEARch:TRIGger:MILStd:ERRor:MANChester?
<SearchName>
SEARch:TRIGger:MILStd:ERRor:PARity <SearchName>,<ParityError>
SEARch:TRIGger:MILStd:ERRor:PARity? <SearchName>
SEARch:TRIGger:MILStd:ERRor:SYNC <SearchName>,<SyncError>
SEARch:TRIGger:MILStd:ERRor:SYNC? <SearchName>
SEARch:TRIGger:MILStd:ERRor:TIMing <SearchName>,<MinGapSelect>
SEARch:TRIGger:MILStd:ERRor:TIMing? <SearchName>
Enables search for errors if SEARch:TRIGger:MILStd:TYPE is set to ERRor.
●
MANChester: error of the manchester coding
●
PARity: even parity (parity error)
●
SYNC: error of the synchronization
●
TIMing: Minimum gap is out of range
Protocols