R&S RTO6 - Page 2028

Remote control commands
R&S
®
RTO6
2028User Manual 1801.6687.02 ─ 05
Return values:
<Type> Returns the word type (specific for the sub-protocol), or the
length of the selected word.
Range: 0 to 65535
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:ETHernet:WORD<n>:DATA?
Returns the number of word bytes in brackets [.] followed by the first six word bytes of
data in hexadecimal format.
Use BUS<m>:ETHernet:WORD<n>:BYTE<o>:VALue? to access the word bytes.
Suffix:
<m>
.
1..4
<n> *
Return values:
<Data> String parameter
Example:
BUS:ETHernet:WORD3:DATA?
<-- '[60]FF00FFFF1234'
Usage: Query only
BUS<m>:ETHernet:WORD<n>:CRC?
Returns the Cyclic Redundancy Code (CRC, or frame check) checksum of the selected
word.
Suffix:
<m>
.
1..4
<n> *
Return values:
<CRC> Range: 0 to 4294967295
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:ETHernet:WORD<n>:DSYMbol?
Returns the symbolic label (or translation) of the destination address of the specified
word, if the label list is enabled.
Suffix:
<m>
.
1..4
<n> *
Protocols