R&S RTO6 - Page 2110

Remote control commands
R&S
®
RTO6
2110User Manual 1801.6687.02 ─ 05
SEARch:TRIGger:HBTO:DATA:IMAX <SearchName>,<DataIndexMax>
SEARch:TRIGger:HBT
O:DA
TA:IMAX? <SearchName>
Sets the end value of the index range if SEARch:TRIGger:HBTO:DATA:
ICONdition is set to INRange or OORange.
Parameters:
<DataIndexMax> Range: 1 to 0
Increment: 1
*RST: 0
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:HBTO:ERRor:PREamble <SearchName>,<ErrorPreamble>
SEARch:TRIGger:HBT
O:ERRor:PREamble
? <SearchName>
Enables / disables search for preamble error.
Parameters:
<ErrorPreamble> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:HBTO:ERRor:CRC <SearchName>,<ErrorCRC>
SEARch:TRIGger:HBTO:ERRor:CRC
? <SearchName>
Enables / disables trigger on Cyclic Redundancy Check (CRC) error.
Parameters:
<ErrorCRC> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:HBTO:ERRor:SFD <SearchName>,<ErrorSFD>
SEARch:TRIGger:HBTO:ERRor:SFD?
<SearchName>
Enables / disables search for start frame delimiter (SFD) error.
Parameters:
<ErrorSFD> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
Protocols