R&S RTO6 - Page 2114

Remote control commands
R&S
®
RTO6
2114User Manual 1801.6687.02 ─ 05
Usage: Query only
SEARch:RESult:HBTO:FRAMe<m>:CRC? <SearchName>
Returns the CRC checksum of the selected frame within the search result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<CRC> Range: 0 to 4294967295
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:HBTO:FRAMe<m>:NUMWords? <SearchName>
Returns the number of decoded words for the selected frame within the search result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<NumWords> Range: 0 to 4294967295
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:HBTO:FRAMe<m>:FTYPe? <SearchName>
Returns the type of frame for the selected frame within the search result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<FrameType> IDLE | MAC | FILLer | UNKNown
IDLE
IDLE frame. This frame is used for clock synchronization.
MAC
MAC frame. This frame contains information that define how to
go about transmitting and receiving frames.
Protocols