R&S RTO6 - Page 2314

Remote control commands
R&S
®
RTO6
2314User Manual 1801.6687.02 ─ 05
SEARch:TRIGger:MPHY:ERRor:REServed <SearchName>,<ErrorReserved>
SEARch:TRIGger:MPHY
:ERRor:REServed
? <SearchName>
Enables/disables search for reserved bit error.
Parameters:
<ErrorReserved> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MPHY:ERRor:LCMD <SearchName>,<LCCError>
SEARch:TRIGger:MPHY:ERRor:LCMD
? <SearchName>
Enables/disables search for LCC error.
Parameters:
<LCCError> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MPHY:ERRor:SYMBol <SearchName>,<ErrorSymbol>
SEARch:TRIGger:MPHY
:ERRor:SYMBol?
<SearchName>
Enables/disables search for 8b10b symbol error.
Parameters:
<ErrorSymbol> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MPHY:ERRor:UNKNown <SearchName>,<ErrorUnknown>
SEARch:TRIGger:MPHY:ERRor:UNKNown
? <SearchName>
Enables/disables search for unidentified UniPro frame error.
Parameters:
<ErrorUnknown> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
Protocols