R&S RTO6 - Page 2391

Remote control commands
R&S
®
RTO6
2391User Manual 1801.6687.02 ─ 05
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:DDR:RESult:FRAMe<n>:FLD<o>:STATus?
Returns the status of the field with the selected field number within the frame with the
selected frame number (for the selected serial bus).
Suffix:
<m>
.
1..4
<n> *
Selects the frame number.
<o> *
Selects the field number.
Return values:
<State> OK |
UNKNown | INComplete | LENGth
*RST: OK
Usage: Query only
BUS<m>:DDR:RESult:FRAMe<n>:FLD<o>:STOP?
Returns the stop time of the field with the selected field number within the frame with
the selected frame number (for the selected serial bus).
Suffix:
<m>
.
1..4
<n> *
Selects the frame number.
<o> *
Selects the field number.
Return values:
<Stop> Range:
-100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:DDR:RESult:FRAMe<n>:FLD<o>:VAL?
Returns the value of the field with the selected field number within the frame with the
selected frame number (for the selected serial bus).
Protocols