Search functions
R&S
®
RTO6
442User Manual 1801.6687.02 ─ 05
To display search zoom windows
1.
In the "Search > Display" tab, enable
"Show result zoom".
This stops a running search and a running acquisition.
The zoom area is indicated in the diagram that displays the source waveform of the
search. The zoom window is displayed for the first result that was found.
2. If you need to adjust the search zoom area, you can drag the area or their edges
on the screen. You can also enter the limits of the search zoom window in the
"Search > Display > Define result zoom".
Be aware, that the zoom window size is valid for all results of a search definition. If
you change the settings drastically for one result, they may not be correct for the
next search result you switch to.
See also:
● Chapter 7.1.3, "Zooming for details", on page 245
Search display presentation
To Next Page
Loading...
