R&S RTO6 - Page 538

Protocol analysis
R&S
®
RTO6
538User Manual 1801.6687.02 ─ 05
Protocol
Defines the protocol type of the selected serial bus.
Remote command:
BUS<m>:
TYPE
on page 1670
Type
Selects the trigger type.
"Data"
Sets the trigger on a data word or a data range that occurs on a
specified channel or on any channel. The instrument triggers on the
last bit of the specified data pattern.
Description of specific trigger type settings:
●
"Channel"
on page 539
●
"Data condition" on page 539
"Window"
This trigger checks if the decoded data values stay inside a "window"
that is formed by a data range and a time specified by a number of
subsequent words. It considers a selected channel or all channels.
The instrument triggers at the end of the last word. Thus, for exam-
ple, you can trigger on a pause.
Description of specific trigger type settings:
●
"Channel"
on page 539
●
"Data condition" on page 539
●
" Window length" on page 540
Audio signals (option R&S RT
O6-K510)