Getting started
R&S
®
RTO6
62User Manual 1801.6687.02 ─ 05
To enter values with the on-screen keypad
To enter numeric values and units in dialogs, the touchscreen provides an on-screen
keypad. For text input, the on-screen keyboard with English key layout is used.
1.
Double-tap the entry field.
The on-screen keypad opens.
2. Enter the numeric value using one of the following methods:
● To use the default value, tap "Reset" (if available).
● To use the minimum or maximum value, tap "Min" or "Max", respectively.
● To increase the displayed value in fixed steps, tap "Inc".
To decrease the value in fixed steps, tap "Dec".
To toggle between small steps and large steps, tap the "Steps" icon.
● To get the value that was used before the keypad opened, tap "Cur".
● To enter a user-defined value, tap the numbers and complete the entry by tap-
ping the unit button.
– The arrow buttons move the cursor left or right.
– "Bksp" deletes the last character before the cursor.
– "±" changes the sign of the value.
To enter data with the on-screen keyboard
1. Double-tap the entry field to open the on-screen keyboard.
If available, you can also tap the keyboard icon on the right of the entry field.
Operating the instrument
To Next Page
Loading...
