R&S RTO6 - Page 624

Protocol analysis
R&S
®
RTO6
624User Manual 1801.6687.02 ─ 05
Trigger type
Selects the trigger type for FlexRay analysis.
"Start of frame"
Triggers on the first rising edge after the transmission start sequence
(TSS).
"Identifier
+data"
Triggers on the decoded frame content, on header and payload data:
●
Indicator bits, see "Indicator bits" on page 625
●
Frame identifier
, see "Frame ID (min/max)" on page 626
●
Payload length, see "Payload length (min/max)" on page 626
●
Cycle count, see "Cycle count (min, max), Step" on page 626
●
Data position, see "Position, Index (min, max) - Data setup"
on page 627
●
Data bit pattern, see "Condition, Data (min, max) - Data setup"
on page 627
"Symbol"
Triggers on a symbol or wakeup pattern, see "Symbol
"
on page 628.
FlexRay (option R&S RT
O6-K520)