R&S RTO6 - Page 739

Protocol analysis
R&S
®
RTO6
739User Manual 1801.6687.02 ─ 05
Destination address ← Frame
To search for a destination address, an address pattern or optionally an address range
have to be specified.
Remote command:
SEARch:
TRIGger:ETHernet:FRAMe:DCONdition on page 2031
SEARch:TRIGger:ETHernet:FRAMe:DMIN on page 2031
SEARch:TRIGger:ETHernet:FRAMe:DMAX on page 2031
Source address ← Frame
To search for a source address, an address pattern or optionally an address range
have to be specified.
Remote command:
SEARch:TRIGger:ETHernet:FRAMe:SCONdition on page 2032
SEARch:TRIGger:ETHernet:FRAMe:SMIN on page 2032
SEARch:TRIGger:ETHernet:FRAMe:SMAX on page 2032
Length/Type ← Frame
To search for a frame length or frame type, a type/length pattern or optionally a range
of type/length patterns have to be specified.
Remote command:
SEARch:TRIGger:ETHernet:FRAMe:TCONdition on page 2033
SEARch:TRIGger:ETHernet:FRAMe:TMIN on page 2033
SEARch:TRIGger:ETHernet:FRAMe:TMAX on page 2033
Frame check ← Frame
To search for a specific pattern, this pattern or optionally a range of patterns have to be
specified.
Remote command:
SEARch:TRIGger:ETHernet:FRAMe:CCONdition on page 2034
SEARch:TRIGger:ETHernet:FRAMe:CMIN on page 2034
SEARch:TRIGger:ETHernet:FRAMe:CMAX on page 2034
Ethernet 10BASE-T and 100BASE-TX (option R&S RTO6-K540)