Instrument setup
R&S
®
RTO6
75User Manual 1801.6687.02 ─ 05
Color source
Selects the waveform to which the color table and the labels are assigned.
A spectrogram (option R&S RT
O6-K37) always has the same color as the math (spec-
trum) waveform from which it is created.
Use color table
If enabled, the selected waveform is displayed according to its assigned color table.
If this option is disabled, the selected color is displayed, and the intensity of the specific
signal color varies according to the cumulative occurrence of the values.
Remote command:
DISPlay:COLor:SIGNal<m>:USE on page 1298
Color
Shows the current color of the selected waveform. To change the color, tap the button
and select a color. The color of the waveform, its signal icon, channel icon, and of the
illuminated keys is adjusted to the new color.
Remote command:
DISPlay:COLor:SIGNal<m>:COLor on page 1297
Assigned color table
Adjust the waveform colors to suit your preferences. For each of the following wave-
form types you can assign a suitable color table:
●
Analog and digital channels
●
Reference waveforms
●
Results of a mathematical function, also for FFT and derived spectrogram.
●
Measurements and tracks
●
XY
-traces
Appearance settings
To Next Page
Loading...
