R&S RTO6 - Page 859

Protocol analysis
R&S
®
RTO6
859User Manual 1801.6687.02 ─ 05
Search criteria
Use the "Search criteria"
dialog to define the search type. If you search for frame con-
tent, define the frame type in which data is to be searched.
You can define individual search parameters for the fields of the selected frame in the
table below the "Search criteria"
. To specify these parameters, select a field in the table
and define the data and/or index operators and values, or the bit state.
For a description of how to set the search conditions, see Chapter 13.21.3.1, "USB 3.1
trigger settings", on page 853.
Remote command:
SEARch:TRIGger:USBThree:ERENable on page 2209
SEARch:TRIGger:USBThree:ERRor<m>:ENABle on page 2209
SEARch:TRIGger:USBThree:FRENable on page 2209
SEARch:TRIGger:USBThree:FRAMe<m>:ENABle on page 2209
SEARch:TRIGger:USBThree:FIENable on page 2210
SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:ENABle on page 2210
SEARch:TRIGger:USBThree:DOPerator on page 2210
SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:DOPerator on page 2210
SEARch:TRIGger:USBThree:DMIN on page 2211
SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:DMIN on page 2211
SEARch:TRIGger:USBThree:DMAX on page 2211
SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:DMAX on page 2211
SEARch:TRIGger:USBThree:BIT on page 2212
SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:BIT on page 2212
USB 3.1 (option R&S R
T
O6-K570)