Protocol analysis
R&S
®
RTO6
871User Manual 1801.6687.02 ─ 05
Figure 13-48: USBPD protocol: decoded signal
The results are shown in two tables:
●
"Decode results": contains information about all decoded frames
●
"Details frame"
: contains more detailed information about the selected frame in the
"Decode results" table.
Table 13-43: Content of the Decode results table
Column Description
State Overall state of the frame
Start Time of frame start
Frame Type Type of the frame
Info Information about the frame
Table 13-44: Content of the Details frame table
Column Description
State Overall state of the field
Start Start time of the field
Type Type (name) of field
Numeric value The numeric value of the field
Formatted Formatted content of the field
Remote commands
Remote commands are described in Chapter 24.17.23.3, "Decode results",
on page 2227.
USBPD (option R&S RT
O6-K570)
To Next Page
Loading...
