R&S RTO6 - Page 1470

Remote control commands
R&S
®
RTO6
1470User Manual 1801.6687.02 ─ 05
CURSor<m>:SOURce <Source>
Defines the source of the cursor measurement.
Suffix:
<m>
.
1..4
Selects the cursor set.
Parameters:
<Source> C1W1 | C1W2 | C1W3 | C2W1 | C2W2 | C2W3 | C3W1 | C3W2 |
C3W3 | C4W1 | C4W2 | C4W3 | M1 | M2 |
M3 | M4 | M5 | M6 |
M7 | M8 | R1 | R2 | R3 | R4 | XY1 | XY2 | XY3 | XY4 | D0 | D1 |
D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 | D12 | D13 |
D14 | D15 | MSOB1 | MSOB2 | MSOB3 | MSOB4 | TRK1 |
TRK2 | TRK3 | TRK4 | TRK5 | TRK6 | TRK7 | TRK8 | SG1 |
SG2 | SG3 | SG4 | SG5 | SG6 | SG7 | SG8 | SG1TL1 | SG1TL2 |
SG2TL1 | SG2TL2 | SG3TL1 | SG3TL2 | SG4TL1 | SG4TL2 |
SG5TL1 | SG5TL2 | SG6TL1 | SG6TL2 | SG7TL1 | SG7TL2 |
SG8TL1 | SG8TL2 | Z1V1 | Z1V2 | Z1V3 | Z1V4 | Z1I1 | Z1I2 |
Z1I3 | Z1I4 | Z2V1 | Z2V2 | Z2V3 | Z2V4 | Z2I1 | Z2I2 | Z2I3 |
Z2I4 | DIFF1 | DIFF2 | COMMON1 | COMMON2
Source of the cursor measurement, see Chapter 24.4.2, "Wave-
form parameter", on page 1284
*RST: C1W1
Usage: Asynchronous command
CURSor<m>:SSOurce <Source2>
Selects the second cursor source.
Suffix:
<m>
.
1..4
Selects the cursor set.
Cursor measurements