Remote control commands
R&S
®
RTO6
1488User Manual 1801.6687.02 ─ 05
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page
1479.
Query parameters:
<MeasT
ype> Amplitude/time measurements
HIGH | LOW | AMPLitude | MAXimum | MINimum | PDELta |
MEAN | RMS | STDDev | POVershoot | NOV
ershoot | AREA |
RTIMe | FTIMe | PPULse | NPULse | PERiod | FREQuency |
PDCYcle | NDCYcle | CYCarea | CYCMean | CYCRms |
CYCStddev | PULCnt | DELay | PHASe | BWIDth | PSWitching |
NSWitching | PULSetrain | EDGecount | SETup | HOLD | SHR |
DTOTrigger | PROBemeter | SLERising | SLEFalling | ATAR
See Chapter 24.12.3, "Amplitude/time measurements",
on page 1489.
Jitter measurements (option R&S RTO6-K12)
CCJitter | NCJitter | CCWidth | CCDutycycle | TIE | UINTerval |
DRATe | SKWDelay | SKWPhase
See Chapter 24.22.1, "Jitter measurements (option R&S RTO6-
K12)", on page 2479
Eye diagram measurements
ERPercent | ERDB | EHEight | EWIDth | ETOP | EBASe | QFAC-
tor | RMSNoise | SNRatio | DCDistortion | ERTime | EFTime |
EBRate | EAMPlitude | PPJitter | STDJitter | RMSJitter | CPPer-
cent
See Chapter 24.12.5, "Eye diagram measurements",
on page 1508.
Spectrum measurements
CPOWer | OBWidth | SBWidth | THD | THDPCT | THDA | THDU
| THDR | PLISt | HAR | THDF | SPAR
See Chapter 24.12.6, "Spectrum", on page 1511.
Histogram measurements
WCOunt | WSAMples | HSAMples | HPEak | PEAK | UPEak-
value | LPEakvalue | HMAXimum | HMINimum | MEDian | MAX-
Min | HMEan | HSTDdev | M1STddev | M2STddev | M3STddev |
MKPositive | MKNegative
See Chapter 24.12.8.2, "Histogram measurement",
on page 1527.
Protocol measurements
NONE | AUDio | F2F | T2F | FLDValue | GAP | MBITrate | SBI-
Trate | BIDLe | FCNT | FEC | FER | CFER
Requires option R&S RTO6-K510 for type AUDio, or option
R&S RTO6-K500.
Optical measurements
OAP | OMA
See Chapter 24.12.7, "Optical measurements", on page 1518.
Automatic measurements
To Next Page
Loading...
