R&S RTO6 - Page 1595

Remote control commands
R&S
®
RTO6
1595User Manual 1801.6687.02 ─ 05
Parameters:
<Beep> NOACtion | SUCCess | VIOLation
See Chapter 24.4.5, "Event parameter", on page 1286
*RST: NOACtion
Parameters for setting and query:
<MaskTestName> String with the name of the mask test
Usage: Asynchronous command
MTESt:ONViolation:STOP <MaskTestName>,<StopAcq>
MTESt:ONViolation:STOP? <MaskTestName>
Stops data acquisition for the specified event.
Parameters:
<StopAcq> NOACtion | SUCCess | VIOLation
See Chapter 24.4.5, "Event parameter", on page 1286
*RST: NOACtion
Parameters for setting and query:
<MaskTestName> String with the name of the mask test
Usage: Asynchronous command
MTESt:ONViolation:PRINt <MaskTestName>,<Print>
MTESt:ONV
iolation:PRINt? <MaskTestName>
Saves a screenshot including the measurement results for the specified event.
Parameters:
<Print> NOACtion | SUCCess | VIOLation
See Event parameter
*RST: NOACtion
Parameters for setting and query:
<MaskTestName> String with the name of the mask test
Usage: Asynchronous command
MTESt:ONViolation:SAVewaveform <MaskT
estName>,<SaveWfm>
MTESt:ONV
iolation:SAVewaveform? <MaskTestName>
Saves the waveform data.
Parameters:
<SaveWfm> NOACtion | SUCCess | VIOLation
See Chapter 24.4.5, "Event parameter", on page 1286
*RST: NOACtion
Mask testing