R&S RTO6 - Page 1633

Remote control commands
R&S
®
RTO6
1633User Manual 1801.6687.02 ─ 05
Parameters for setting and query:
<SearchName> Search definition
Usage: Asynchronous command
SEARch:GATE:RELative:STARt <SearchName>,<RelativeStart>
SEARch:GATE:RELative:ST
ARt? <SearchName>
Defines the starting value for the gate.
Parameters:
<RelativeStart> Range: 0 to 100
Increment: 0.1
*RST: 0
Default unit: %
Parameters for setting and query:
<SearchName> Search definition
Usage: Asynchronous command
SEARch:GATE:RELative:STOP <SearchName>,<RelativeStop>
SEARch:GA
TE:RELative:ST
OP? <SearchName>
Defines the end value for the gate.
Parameters:
<RelativeStop> Range: 0 to 100
Increment: 0.1
*RST: 100
Default unit: %
Parameters for setting and query:
<SearchName> Search definition
Usage: Asynchronous command
SEARch:GATE:ZCOupling <SearchName>,<ZoomCoupling>
SEARch:GATE:ZCOupling
? <SearchName>
If enabled, the gate area is set to the limits of a zoom area.
The zoom diagramm is selected using SEARch:GATE:ZDIagram.
Parameters:
<ZoomCoupling> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName> String with the name of the search
Usage: Asynchronous command
Search