R&S RTO6 - Page 1658

Remote control commands
R&S
®
RTO6
1658User Manual 1801.6687.02 ─ 05
EXPort:EYE:DATA?
T
ransfers the eye data to the controlling computer
. The data can be used in MATLAB,
for example.
To set the export data format, use FORMat[:DATA].
Usage: Query only
EXPort:EYE:NAME <Path>
Sets the path, the file name, and the file format for the eye file. Available file formats
are *csv and *bin.
Parameters:
<Path>
Usage: Asynchronous command
EXPort:EYE:SAVE
Saves the selected eye to the file that is specified with EXPort:EYE:NAME.
Usage: Event
EXPort:EYE:SELect <SelectableEye>
Selects the eye that you want to save to a file.
Parameters:
<SelectableEye> EYE1 | EYE2 | EYE3 | EYE4
*RST: EYE1
Usage: Asynchronous command
EXPort:EYE:SOURce?
Returns the source of the eye measurement, selected with EXPort:EYE:SELect
.
Return values:
<Source> C1W1 | C1W2 | C1W3 | C1W4 | C2W1 | C2W2 | C2W3 | C2W4 |
C3W1 | C3W2 | C3W3 | C3W4 | C4W1 | C4W2 | C4W3 | C4W4
*RST: NONE
Usage: Query only
Asynchronous command
Data management