R&S RTO6 - Page 1742

Remote control commands
R&S
®
RTO6
1742User Manual 1801.6687.02 ─ 05
BUS<m>:I2S:BORDer <BitOrder>
Sets the bit order of the audio data words.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<BitOrder> LSBF | MSBF
LSB first or MSB first
*RST: MSBF
BUS<m>:I2S:CHANnel:OFFSet <ChannelOffset>
Sets the number of bits between the channel start and the start of the audio word.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<ChannelOf
fset> Range: 0 to 32 (left-justified). TDM: maximum delay is
Channel length - W
ord length
Increment:
1
*RST: 0
Default unit: bit
BUS<m>:I2S:CHANnel:TDMCount <ChannelsTDM>
Sets the number of channels transmitted on the TDM audio line.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<ChannelsTDM> Range: 1 to 8
Increment: 1
*RST: 1
BUS<m>:I2S:FOFFset <FrameOffsetTDM>
Sets the number of bits between the frame start and the start of the first channel of a
TDM audio line. Each FSYNC edge restarts the of
fset count.
Suffix:
<m>
.
1..4
Selects the serial bus.
Protocols