R&S RTO6 - Page 1741

Remote control commands
R&S
®
RTO6
1741User Manual 1801.6687.02 ─ 05
Parameters:
<WSThreshold> Range: -10 to 10
Increment: 1E-3
*RST: 1.6
Default unit: V
BUS<m>:I2S:DATA:THReshold <SDAT
AThreshold>
Sets the threshold value for the data line.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<SDATAThreshold> Range: -10 to 10
Increment: 1E-3
*RST: 1.6
Default unit: V
BUS<m>:I2S:CHANnel:ORDer <ChannelOrder>
Defines if the left or the right channel is the first channel in the frame.
The setting is not available for TDM audio signals.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<ChannelOrder> LFIRst | RFIRst
Left channel first or right first
*RST: LFIRst
BUS<m>:I2S:WLENgth <W
ordLength>
Defines the number of bits in an audio data word.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<W
ordLength> Range: 4 to 32
Increment: 4
*RST: 8
Default unit: bit
Protocols