R&S RTO6 - Page 1749

Remote control commands
R&S
®
RTO6
1749User Manual 1801.6687.02 ─ 05
BUS<m>:I2S:FRAMe<n>:LEFT:STATe?
BUS<m>:I2S:FRAMe<n>:
RIGHt:ST
ATe?
Return the status of the left and right channel of the selected frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<WordState> ERRor | OK | INSufficient
OK: the channel data is valid.
ERRor: an error occured in the channel.
INSuf
ficient: the channel is not completely contained in the
acquisition.
Usage: Query only
BUS<m>:I2S:FRAMe<n>:TDM<o>:STATe?
Returns the state of the indicated channel of the selected frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> 1..8
Selects the TDM channel.
Return values:
<State> ERRor | OK | INSufficient
OK: the channel data is valid.
ERRor: an error occured in the channel.
INSuf
ficient: the channel is not completely contained in the
acquisition.
*RST
: UNDefined
Usage: Query only
BUS<m>:I2S:FRAMe<n>:TDM<o>:VALue?
Returns the data value of the indicated TDM channel.
Suffix:
<m>
.
1..4
Selects the serial bus.
Protocols