R&S RTO6 - Page 1882

Remote control commands
R&S
®
RTO6
1882User Manual 1801.6687.02 ─ 05
BUS<m>:FLXRay:FRAMe<n>:PAYLength?
Returns the payload length, the number of data words in the payload segment. Infor-
mation is transmitted in 2-byte words, so the number of data bytes in the payload seg-
ment is twice the payload length.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<PayLen> Range: 0 to 127
*RST: 0
Usage: Query only
BUS<m>:FLXRay:FRAMe<n>:CYCount?
Returns the number of the current FlexRay cycle.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<CycleCount> Range: 0 to 63
*RST: 0
Usage: Query only
BUS<m>:FLXRay:FRAMe<n>:CSSTate?
Returns the state of the cyclic redundancy check code of the header data.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<HdrCksumSt> OK | UVAL | INSufficient
OK: the CRC is valid.
UV
AL: unexpected value
INSuf
ficient: the frame is not completely contained in the acqui-
sition. The decoded part of the frame is valid.
*RST: OK
Protocols