R&S RTO6 - Page 2073

Remote control commands
R&S
®
RTO6
2073User Manual 1801.6687.02 ─ 05
BUS<m>:RFFE:SEQuence<n>:DATA?
Returns the data bytes of the specified command sequence.
Use BUS<m>:
RFFE:SEQuence<n>:
BYTE<o>:VALue? to access the sequence
bytes.
Suffix:
<m>
.
1..4
<n> *
Return values:
<Data> Bit pattern (B1, B2, B3, B4…) in variable length up to eight
bytes.
Example:
BUS:RFFE:SEQuence3:DATA?
<-- #H08,
#H49,#H54,
#H33,#HFF
Usage: Query only
BUS<m>:RFFE:SEQuence<n>:SYMBol?
Returns the symbolic label that belongs to the address of the selected command
sequence.
Suffix:
<m>
.
1..4
<n> *
Return values:
<Translation> String containing the label name
Usage: Query only
BUS<m>:RFFE:SEQuence<n>:PADone?
Returns the address-one parity for the selected command sequence.
Suffix:
<m>
.
1..4
<n> *
Return values:
<ParityAddr1> OK | PARity
PARity: P
Arrity error
*RST
: OK
Usage: Query only
BUS<m>:RFFE:SEQuence<n>:PADZero?
Returns the address-zero parity for the selected command sequence.
Protocols