R&S RTO6 - Page 2077

Remote control commands
R&S
®
RTO6
2077User Manual 1801.6687.02 ─ 05
STARt
Start of a command sequence (SSC). Optional: slave address.
ST
OP
End of a command sequence (start of the bus park cycle).
Optional: slave address condition.
RZWR
Register 0 W
rite command sequence. Optional: slave address
condition and data pattern condition.
RWR
Register Write command sequence. Optional: slave address
condition, register address condition, and data pattern condition.
RRD
Register Read command sequence. Optional: slave address
condition, register address condition, and data pattern condition.
ERWR
Extended Register Write command sequences. Optional: slave
address condition, register address condition, byte count condi-
tion, data index condition, and data pattern condition.
ERRD
Extended Register Read command sequence. Optional search
conditions are the same as for ERWR.
ERWL
Extended Register Write Long command sequence. Optional
search conditions are the same as for ERWR.
ERRL
Extended Register Read Long command sequence. Optional
search conditions are the same as for ERWR.
MASR
Master Read command sequence. Optional: slave address con-
dition, register address condition, and data pattern condition.
MASW
Master Write command sequence. Optional: slave address con-
dition, register address condition, and data pattern condition.
MASOHO
Master Ownership Handover command sequence. Optional:
slave address condition, and data pattern condition.
MSKW
Masked Write command sequence. Optional: slave address con-
dition, register address condition, mask condition and data pat-
tern condition.
MCTW
Master Context Transfer Write command sequence. Optional:
MID condition, register address condition, byte count condition,
data index condition, and data pattern condition.
Protocols