R&S RTO6 - Page 2078

Remote control commands
R&S
®
RTO6
2078User Manual 1801.6687.02 ─ 05
MCTR
Master Context T
ransfer Read command sequence. Optional
search conditions are the same as for MCTW
IRSUM
Interrupt Summary and Notification. Optional: slave address
condition, byte count condition, and data pattern condition.
ERRor
Searches for enabled errors. T
o enable the error types, use:
SEARch:TRIGger:RFFE:ERRor:LENGth
SEARch:TRIGger:RFFE:ERRor:PARity
SEARch:TRIGger:RFFE:ERRor:SSC
*RST: STARt
Parameters for setting and query:
<SearchName> String parameter
Example: See "Searching RFFE data" on page 1274
To specify additional search conditions for command sequences, use the following
commands:
Slave address SEARch:TRIGger:RFFE:SADD:CONDition
SEARch:
TRIGger:RFFE:
SADD:MIN
SEARch:TRIGger:RFFE:SADD:MAX
Register address SEARch:TRIGger:RFFE:ADDRess:CONDition
SEARch:
TRIGger:RFFE:
ADDRess:MIN
SEARch:TRIGger:RFFE:ADDRess:MAX
Data pattern SEARch:TRIGger:RFFE:DATA:DCON
SEARch:
TRIGger:RFFE:
DATA:DMIN
SEARch:TRIGger:RFFE:DATA:DMAX
Byte count SEARch:TRIGger:RFFE:BCOunt:CONDition
SEARch:
TRIGger:RFFE:
BCOunt:MIN
SEARch:TRIGger:RFFE:BCOunt:MAX
Data index SEARch:TRIGger:RFFE:DATA:ICONdition
SEARch:
TRIGger:RFFE:
DATA:IMIN
SEARch:TRIGger:RFFE:DATA:IMAX
SEARch:TRIGger:RFFE:SADD:CONDition <SearchName>,<SIDOperator>
SEARch:TRIGger:RFFE:SADD:CONDition
? <SearchName>
SEARch:TRIGger:RFFE:ADDRess:CONDition <SearchName>,<AddressOperator>
SEARch:TRIGger:RFFE:ADDRess:CONDition? <SearchName>
Protocols