R&S RTO6 - Page 2202

Remote control commands
R&S
®
RTO6
2202User Manual 1801.6687.02 ─ 05
TRIGger<m>:USBThree:DMAX <Frame>, <Field>, <Data>
TRIGger<m>:USBThree:FRAMe<n>:
FLD<o>:
DMAX <DataMax>
Sets the end value of a data pattern range if TRIGger<m>:USBThree:FRAMe<n>:
FLD<o>:DOPerator is set to INRange or OORange.
Suffix:
<m>
.
1..3
Only 1 = A-trigger, 2 | 3 = not available. Can be omitted.
<n> *
Specifies the field number within the frame.
<o> *
Parameters:
<DataMax>
TRIGger<m>:USBThree:BIT <Frame>, <Field>, <Bit>
TRIGger<m>:USBThree:FRAMe<n>:FLD<o>:
BIT <BitState>
Sets the bit state of a field that only consists of one bit.
Suffix:
<m>
.
1..3
Only 1 = A-trigger, 2 | 3 = not available. Can be omitted.
<n> *
Specifies the field number within the frame.
<o> *
Parameters:
<BitState> ONE |
ZERO | DC
ONE
1
ZERO
0
DC
"Don't care" (DC) = X
*RST: DC
TRIGger<m>:USBThree:IOPerator <Frame>, <Field>, <Operator>
TRIGger<m>:USBThree:FRAMe<n>:FLD<o>:
IOPerator <IndexOperator>
Sets the operator for the index in the selected field of the selected frame.
Suffix:
<m>
.
1..3
Only 1 = A-trigger, 2 | 3 = not available. Can be omitted.
<n> *
Specifies the field number within the frame.
Protocols