R&S RTO6 - Page 2213

Remote control commands
R&S
®
RTO6
2213User Manual 1801.6687.02 ─ 05
<n> *
Parameters:
<IndexOperator> EQUal | INRange | RANGe
EQUal
This condition requires one endpoint value to be set using
SEARch:TRIGger:USBThree:
FRAMe<m>:FLD<n>:IMIN.
INRange | RANGe
This condition requires a range of endpoint values to be set
using SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:
IMIN and SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:
IMAX.
*RST: INRange
Parameters for setting and query:
<SearchName> String with the name of the search.
SEARch:TRIGger:USBThree:IMIN <SearchName>,<Frame>, <Field>, <Data>
SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:IMIN <SearchName>,<IndexMin>
SEARch:TRIGger:USBThree:
FRAMe<m>:FLD<n>:IMIN? <SearchName>
Specifies the index at which the data is to be searched, or sets the start value of an
index range in which the data is to be searched.
Suffix:
<m>
.
*
Specifies the field number within the frame.
<n> *
Parameters:
<IndexMin> Specifies the index value or the start value of an index range
within the field.
The index range, increment and *RST values depend on the
field type.
Parameters for setting and query:
<SearchName> String with the name of the search.
SEARch:TRIGger:USBThree:IMAX <SearchName>,<Frame>, <Field>, <Data>
SEARch:TRIGger:USBThree:FRAMe<m>:FLD<n>:IMAX
<SearchName>,<IndexMax>
SEARch:TRIGger:USBThree:
FRAMe<m>:FLD<n>:IMAX? <SearchName>
Sets the end value of an index range if SEARch:TRIGger:USBThree:FRAMe<m>:
FLD<n>:IOPerator is set to INRange or RANGe.
Suffix:
<m>
.
*
Specifies the field number within the frame.
<n> *
Protocols