R&S RTO6 - Page 230

Triggers
R&S
®
RTO6
230User Manual 1801.6687.02 ─ 05
The B-trigger is the second condition of the trigger sequence. You can configure a
delay between the A- and B-trigger, and define a number of fulfilled B-trigger conditions
to be ignored. The B-trigger condition is configured in the same way as the A-trigger
.
The instrument disables settings that do not fit the previous settings in the sequence.
The reset condition R can be a timeout or a trigger condition, or a combination of both.
Sequence
Selects the type of the sequence.
"A → B → R"
Triggers if all conditions of A- and B-events, as well as additional
delay and reset timeout or R-event (reset) conditions are fulfilled.
Sequence