R&S RTO6 - Page 2394

Remote control commands
R&S
®
RTO6
2394User Manual 1801.6687.02 ─ 05
SEARch:TRIGger:DDR:ERENable.................................................................................
2394
SEARch:TRIGger:DDR:ERRor<m>:ENABle...................................................................
2394
SEARch:TRIGger:DDR:FIENable.................................................................................. 2394
SEARch:TRIGger:DDR:FRENable.................................................................................2395
SEARch:TRIGger:DDR:DMAX.......................................................................................2395
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:DMAX........................................................2395
SEARch:TRIGger:DDR:DMIN........................................................................................2395
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:DMIN.........................................................2395
SEARch:TRIGger:DDR:DOPerator................................................................................ 2396
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:DOPerator................................................. 2396
SEARch:TRIGger:DDR:FRENable.................................................................................2396
SEARch:TRIGger:DDR:FRAMe<m>:ENABle.................................................................. 2396
SEARch:TRIGger:DDR:IMAX........................................................................................2397
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:IMAX.........................................................2397
SEARch:TRIGger:DDR:IMIN.........................................................................................2397
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:IMIN.......................................................... 2397
SEARch:TRIGger:DDR:IOPerator..................................................................................2397
SEARch:TRIGger:DDR:FRAMe<m>:FLD<n>:IOPerator...................................................2397
SEARch:TRIGger:DDR:ERENable <SearchName>,<ErrorName>, <Enabler>
SEARch:TRIGger:DDR:ERRor<m>:ENABle <SearchName>,<Enable>
SEARch:TRIGger:DDR:ERRor<m>:ENABle? <SearchName>
Defines the error type to be searched for. You can search for all error types in parallel.
Suffix:
<m>
.
*
Specifies the error
.
Parameters:
<Enable> ON |
OFF
*RST: ON
Parameters for setting and query:
<SearchName> The following errors are available:
Frame
Incomplete
Length
Error
Example:
SEARch:TRIGger:DDR:ERRor1:ENABle ON
Enables searching for Frame Incomplete error
.
SEARch:
TRIGger:DDR:ERENable "Length Error",ON
Enables searching for Length Error.
SEARch:TRIGger:DDR:FIENable <SearchName>,<Frame>, <Field>, <Enabler>
Setting parameters:
<SearchName>
<Frame>
<Field>
<Enabler> ON | OFF
Protocols