R&S RTO6 - Page 2470

Remote control commands
R&S
®
RTO6
2470User Manual 1801.6687.02 ─ 05
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
TDRT:SIGNal<m>:SCALe <VerticalScale>
Set the vertical scale of the indicated TDR/TDT signal.
Suffix:
<m>
.
1..3
See
TDRT:SIGNal<m>STATe
on page 2469.
Parameters:
<VerticalScale> Range: 1E-12 to 100E+12
Increment: 1E-3
*RST: 0.05
Default unit: /div
Usage: Asynchronous command
TDRT:SIGNal<m>:OFFSet <Offset>
Set the of
fset of the indicated TDR/TDT signal.
Suffix:
<m>
.
1..3
See TDRT:SIGNal<m>STATe
on page 2469.
Parameters:
<Offset> Range: 1E-12 to 100E+12
Increment: 0.01
*RST: 0
Usage: Asynchronous command
TDRT:SIGNal<m>:POSition <Position>
Set the vertical position of the indicated TDR/TDT signal.
Suffix:
<m>
.
1..3
See TDRT:SIGNal<m>STATe
on page 2469.
Parameters:
<Position> Range: 1E-12 to 100E+12
Increment: 0.02
*RST: 0
Default unit: div
Usage: Asynchronous command
Pulse Source and TDR/TDT Analysis (options R&S RT
O6-B7/K130)