R&S RTO6 - Page 2521

Remote control commands
R&S
®
RTO6
2521User Manual 1801.6687.02 ─ 05
POWer:DESKew:CURRent...........................................................................................
2521
POW
er:DESKew:EXECute............................................................................................2521
POWer:DESKew:RESet................................................................................................2521
POWer:DESKew:TIME?............................................................................................... 2521
POWer:DESKew:UDPReset..........................................................................................2521
POWer:DESKew:CURRent
Applies the result of the auto deskew to the "Skew offset" value.
Usage: Event
POWer:DESKew:EXECute
Starts the auto deskew.
Usage: Event
POWer:DESKew:RESet <OverwriteCurrSkew>
Overwrites the present skew setup.
Parameters:
<OverwriteCurrSkew>ON | OFF
*RST: ON
POWer:DESKew:TIME?
Queries the result of the auto deskew.
Return values:
<AutoDeskewOf
fs> Range: -100E-9 to 100E-9
*RST: 0
Default unit: s
Usage: Query only
POWer:DESKew:UDPReset <UsrDefinedPreset>
Activates or deactivates a user defined setup. If ON, the instrument setup including
probe setup and the deskew values are written to a user defined preset file (saveset)
that can be loaded using MMEMory:RCL
on page 1646.
The default path is:
C:\Users\Public\Documents\Rohde-Schwarz\RTO6\SaveSets\
Parameters:
<UsrDefinedPreset> ON | OFF
*RST: ON
Power analysis (option R&S RT
O6-K31)