Getting started
R&S
®
RTO6
55User Manual 1801.6687.02 ─ 05
Undo
Undoes the last setting actions step by step. Some actions cannot be revoked: locking
the touchscreen with
[T
ouch Lock], and saving data. The undo stack is deleted during
the following actions: Reloading settings from file, reference waveform actions (save,
load and preset with active reference waveform), and some actions that require an
internal re-alignment to ensure correct measurements.
Redo
Recovers the undo steps in reverse order
.
Help
Enables the tooltip display. A short description appears when you tap a parameter in a
dialog. T
o open the corresponding help topic, tap the "Show Help" button in the lower
right corner of the tooltip. See also: Chapter 3.3.11, "Getting help", on page 64.
Recall
Opens a window to select and load instrument settings that were previously stored in a
saveset. A graphical preview helps you to find the required settings.
Save
Saves the current instrument settings in a saveset.
You can reload the saveset using the
"Recall" toolbar icon, or using "Menu" > "Save/
Recall" > "Recall" tab > "Saveset with preview".
The filename is created according to the autonaming pattern, defined in "Menu" > "Set-
tings" > "Save/Recall" > "Autonaming" tab.
Image
Saves a screenshot of the current display using the settings defined in "Menu" >"Save/
Recall" > "Save" tab > "Screenshot".
Report
Creates a report of the current measurement settings and results using the settings
defined in "Menu" > "Save/Recall" > "Save" tab > "Report".
Clear
Deletes all measurement results including long term measurement and statistics, all
waveforms, and the history.
Remote command:
DISPlay:CLR on page 1321
Autoset and Preset
Performs an autoset, or a preset to a default state. The icons have the same function-
ality as the corresponding keys on the front panel. They are useful when you operate
the instrument remotely.
Run / Stop and Single
Starts and stops the continuous acquisition, or starts a defined number of acquisition
cycles. The icons have the same functionality as the corresponding keys on the front
panel. They are useful when you control the instrument remotely
.
Operating the instrument
To Next Page
Loading...
