R&S RTO6 - Page 672

Protocol analysis
R&S
®
RTO6
672User Manual 1801.6687.02 ─ 05
Normal ← Trigger type
T
riggers on a normal frame.
Y
ou can refine the trigger condition:
●
Set a frame ID pattern or a frame ID range to trigger only on frames that fulfill these
conditions.
See: "Frame ID" on page 676
●
Set an NM value expected in the frame.
See "NM" on page 678.
●
Set a CT value expected in the frame.
See: "CT" on page 678.
●
Set a DLC pattern or DLC pattern range to trigger only on frames that fulfill these
conditions.
See: "DLC" on page 677.
●
Set a data pattern condition to trigger only on frames that fulfill these conditions.
See: "Data" on page 677.
●
Set an index or index range to trigger only on frames that fulfill these conditions.
See: "Index" on page 678.
Normal Poll ← Trigger type
Triggers on a normal poll frame.
Y
ou can refine the trigger condition:
●
Set a frame ID pattern or a frame ID range to trigger only on frames that fulfill these
conditions.
See: "Frame ID" on page 676
●
Set an NM value expected in the frame.
See "NM" on page 678.
●
Set a CT value expected in the frame.
See: "CT" on page 678.
●
Set a DLC pattern or DLC pattern range to trigger only on frames that fulfill these
conditions.
See: "DLC" on page 677.
●
Set a data pattern condition to trigger only on frames that fulfill these conditions.
CXPI (option R&S R
T
O6-K520)