R&S RTO6 - Page 673

Protocol analysis
R&S
®
RTO6
673User Manual 1801.6687.02 ─ 05
See: "Data" on page 677
.
●
Set an index or index range to trigger only on frames that fulfill these conditions.
See:
"Index" on page 678.
Sleep ← Trigger type
Triggers on a sleep frame.
Y
ou can refine the trigger condition:
●
Set an NM value expected in the frame.
See "NM" on page 678.
●
Set a CT value expected in the frame.
See: "CT" on page 678.
●
Set a data pattern condition to trigger only on frames that fulfill these conditions.
See: "Data" on page 677.
●
Set an index or index range to trigger only on frames that fulfill these conditions.
See: "Index" on page 678.
Long ← Trigger type
Triggers on a long frame.
Y
ou can refine the trigger condition:
●
Set a frame ID pattern or a frame ID range to trigger only on frames that fulfill these
conditions.
CXPI (option R&S R
T
O6-K520)