R&S RTO6 - Page 1458

Remote control commands
R&S
®
RTO6
1458User Manual 1801.6687.02 ─ 05
AVERage
Calculates the average from the math data of the current acqui-
sition and a number of acquisitions before. T
o define the number
of acquisitions, use ACQuire:COUNt.
RMS
The resulting math waveform is the root mean square of the cur-
rent acquisition and a number of acquisitions before. The result
is the average power spectrum. Number of acquisitions:
ACQuire:
COUNt
MAXHold
Determines the maximum result for each input value from the
math data of the current acquisition and a number of acquisi-
tions before. To define the number of acquisitions, use
ACQuire:COUNt.
MINHold
Determines the minimum result for each input value from the
math data of the current acquisition and a number of acquisi-
tions before. To define the number of acquisitions, use
ACQuire:COUNt.
*RST: OFF
Usage: Asynchronous command
CALCulate:MATH<m>:VERTical:OFFSet <V
erticalOf
fset>
Sets a voltage offset to adjust the vertical position of the math function on the screen.
Suffix:
<m>
.
1..8
Math waveform
Parameters:
<VerticalOffset> Negative values move the waveform au, positive values move it
down.
Range: -100E+12 to 100E+12
Increment: 0.01
*RST: 0
Default unit: div
Usage: Asynchronous command
CALCulate:MATH<m>:VERTical:RANGe <VerticalRange>
Defines the range of FFT values to be displayed.
Suffix:
<m>
.
1..8
Math waveform
Waveform analysis