R&S RTO6 - Page 1663

Remote control commands
R&S
®
RTO6
1663User Manual 1801.6687.02 ─ 05
Parameters:
<WhiteBackground> ON | OFF
*RST: OFF
Usage: Asynchronous command
HCOPy:CMAP<m>:DEFault <PrintColorSet>
Defines the default color set for printing of the display image.
To set the output to printer
, use HCOPy:DESTination<1..2> with parameter
'SYST:COMM:PRIN'.
Suffix:
<m>
.
1..2
Selects the output configuration.
Parameters:
<PrintColorSet> DEF1 | DEF4
DEF1
Current screen colors with white background and black grid.
DEF4
Current screen colors without any changes (black background).
*RST: DEF1
Usage: Asynchronous command
HCOPy:SSD <ShowSetupDialog>
Enables or disables the display of open dialog boxes in screenshots. Use this com-
mand if you want to document settings in screenshots.
Parameters:
<ShowSetupDialog> ON | OFF
*RST: OFF
Usage: Asynchronous command
Firmware/software: FW 3.20
HCOPy:ISBA IncludeSignalBar
If the value is set to OFF, the screenshot shows only the diagram area, without the sig-
nal bar.
Parameters:
IncludeSignalBar
ON | OFF
*RST: OFF
Usage: Asynchronous command
Data management