R&S RTO6 - Page 1661

Remote control commands
R&S
®
RTO6
1661User Manual 1801.6687.02 ─ 05
Note that the remote mode is intended for maximum performance. Therefore, the dis-
play does not follow the remote commmands consistantly
. T
o get a correct screenshot,
turn the display on using SYST:DISP:UPD ON.
HCOPy:DESTination<1..2>........................................................................................... 1661
MMEMory:NAME......................................................................................................... 1661
HCOPy:DEVice<m>:LANGuage.................................................................................... 1662
HCOPy:DEVice<m>:INVerse.........................................................................................1662
HCOPy:WBKG............................................................................................................ 1662
HCOPy:CMAP<m>:DEFault..........................................................................................1663
HCOPy:SSD................................................................................................................1663
HCOPy:ISBA...............................................................................................................1663
HCOPy:IMMediate<m>[:DUM].......................................................................................1664
HCOPy:IMMediate<m>:NEXT....................................................................................... 1664
HCOPy:DESTination<1..2> <Medium>
Selects the output medium: file, printer or clipboard.
Suffix:
1..2
.
Selects the output configuration.
Parameters:
<Medium> MMEM | SYST:COMM:CLIP
String parameter
MMEM
Directs the display image to a file. The MMEMory:
NAME
com-
mand defines the file name. The file format is defined with
HCOPy:DEVice<m>:LANGuage.
SYST:COMM:CLIP
Directs the hardcopy to the clipboard.
*RST: SYST:COMM:CLIP
Example:
HCOP:DEST 'MMEM'
See also Chapter 24.3.5.1, "Saving a screenshot to file",
on page
1266
Usage: Asynchronous command
MMEMory:NAME <FileName>
Defines the file name when an image of the display is stored to a file.
Setting parameters:
<FileName> String parameter specifiying path and file name of the screen-
shot.
Example: See Chapter 24.3.5.1, "Saving a screenshot to file",
on page
1266
Data management