R&S RTO6 - Page 1692

Remote control commands
R&S
®
RTO6
1692User Manual 1801.6687.02 ─ 05
<n> *
Selects the frame.
<o> *
Selects the byte number.
Return values:
<V
alueComplete> ON | OFF
*RST: OFF
Usage: Query only
BUS<m>:I2C:FRAMe<n>:BYTE<o>:STARt?
Returns the start time of the specified data byte.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the byte number
.
Return values:
<Start> Range:
-100E+24 to 100E+24
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:I2C:FRAMe<n>:BYTE<o>:VALue?
Returns the data value of the specified byte.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the byte number
.
Return values:
<V
alue> To set the value format, use FORMat:BPATtern
.
The values below – range, increment and default – are decimal
values.
Range: 0 to 255
*RST: 0
Usage: Query only
Protocols