R&S RTO6 - Page 2011

Remote control commands
R&S
®
RTO6
2011User Manual 1801.6687.02 ─ 05
SEARch:TRIGger:SWIRe:ERRor:ESC...........................................................................
2012
SEARch:
TRIGger:SWIRe:ERRor:PARity........................................................................ 2012
SEARch:TRIGger:SWIRe:TIME:CONDition.....................................................................2013
SEARch:TRIGger:SWIRe:TIME:MAX.............................................................................2013
SEARch:TRIGger:SWIRe:TIME:MIN.............................................................................. 2013
SEARch:TRIGger:SWIRe:TYPE.................................................................................... 2014
SEARch:TRIGger:SWIRe:CTYPe <SearchName>,<ControlType>
SEARch:TRIGger:SWIRe:CTYPe? <SearchName>
Searches for a specific control type character.
Parameters:
<ControlType> ANY | FCT | EOP | EEP
FCT
Flow Control T
oken
EOP
Normal End of Packet
EEP
Error End of Packet
*RST
: ANY
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:SWIRe:DATA:CONDition <SearchName>,<DataOperator>
SEARch:TRIGger:SWIRe:DATA:CONDition? <SearchName>
Set the condition for the data pattern data value. You can define an exact value or a
value range.
Parameters:
<DataOperator> EQUal | NEQual | LTHan | LETHan | GTHan | GETHan |
INRange | OORange
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan
Equal, Not equal, Less than, Less or equal than, Greater Than,
Greater or equal than. These conditions require one data pattern
to be set with the corresponding SEARch:
TRIGger:SWIRe:
DATA:MIN command.
INRange | OORange
In range/Out of range: set the minimum and maximum value of
the range with SEARch:TRIGger:SWIRe:DATA:MIN and
SEARch:TRIGger:SWIRe:DATA:MAX.
*RST: EQUal
Parameters for setting and query:
<SearchName>
Protocols