R&S RTO6 - Page 2170

Remote control commands
R&S
®
RTO6
2170User Manual 1801.6687.02 ─ 05
Parameters:
<Address>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:AMAX <SearchName>,<AddressTo>
SEARch:TRIGger:USB:AMAX
? <SearchName>
Sets the the end value of an address range if TRIGger<m>:USB:ACONdition is set
to INRange or OORange. The string parameter does not accept the bit value X (don't
care).
Parameters:
<AddressTo>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:BITSterror <SearchName>,<BitstuffError>
SEARch:TRIGger:USB:BITSterror
? <SearchName>
Defines, whether a search for any bitstuffing error shall be activated or not.
Parameters:
<BitstuffError> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:CRC16error <SearchName>,<CRC16Error>
SEARch:TRIGger:USB:CRC16error? <SearchName>
Defines, whether a search for any CRC16 error shall be activated or not.
Parameters:
<CRC16Error>
ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:CRC5error <SearchName>,<CRC5Error>
SEARch:TRIGger:USB:CRC5error? <SearchName>
Defines, whether a search for any CRC5 error shall be activated or not.
Parameters:
<CRC5Error>
ON | OFF
*RST: OFF
Protocols