R&S RTO6 - Page 2488

Remote control commands
R&S
®
RTO6
2488User Manual 1801.6687.02 ─ 05
ADVJitter<m>:SIGNal:CFEStimation
Executes an estimation of the signal for the clock of
fset.
Suffix:
<m>
.
1..2
Usage: Event
Asynchronous command
ADVJitter<m>:SIGNal:CLFRequency <Frequency>
Sets the clock frequency for the explicit clock signal.
Suffix:
<m>
.
1..2
Parameters:
<Frequency> Range: 1000 to 10E+9
Increment: 10
*RST: 1E+9
Default unit: Hz
ADVJitter<m>:SIGNal:CLOFfset <Offset>
Sets a clock of
fset for the explicit clock signal.
Suffix:
<m>
.
1..2
Parameters:
<Offset> Range: -1000 to 1000
Increment: 0.01
*RST: 0
Default unit: UI
ADVJitter<m>:SIGNal:DATRate?
Displays the calculated data rate of the explicit clock signal.
Suffix:
<m>
.
1..2
Return values:
<DatarateValue> Range: 1000 to 10E+9
Increment: 10
*RST: 1E+9
Default unit: bps
Usage: Query only
Jitter analysis and clock data recovery