R&S RTO6 - Page 353

Measurements
R&S
®
RTO6
353User Manual 1801.6687.02 ─ 05
Protocol Frame Field
RFFE Register 0 Write
Register W
rite
Register Read
Extended Register W
rite
Extended Register Read
Extended Register Write Long
Extended Register Read Long
Interrupt Summary and Identifica-
tion
Masked Write
Master Ownership Handover
Master Write
Master Read
Master Context Transfer Write
Master Context Transfer Read
SA
MID
BC
Addr
Mask
Data
Ethernet MAC
Sleep
EOS
Preamble
SFD
Dest
Src
Len/Type
Data
FCS
Idle Triplet
100BASE-T1 MAC
Fill
Preamble
SFD
Dest
Src
Len/Type
Data
FCS
Idle Triplet
Also, if a label list is loaded and enabled for the protocol, the symbolic label names can
be selected from the "Frame"/
"Field" value list.
"Frame"
Selects the type of start frame (from) / end frame (to).
"Field"
Selects the type of start field (from) / end field (to).
"Value"
Sets a value for the selected field.
Remote command:
MEASurement<m>:PROTocol:
F2FRame:FRMFrom on page 1541
MEASurement<m>:PROTocol:F2FRame:FRMTo on page 1541
MEASurement<m>:PROTocol:F2FRame:FLDFrom on page 1540
MEASurement<m>:PROTocol:F2FRame:FLDTo on page 1540
Automatic measurements