R&S RTO6 - Page 693

Protocol analysis
R&S
®
RTO6
693User Manual 1801.6687.02 ─ 05
"Status Word"
Triggers on a specified status word.
"Error Condi-
tion"
Triggers on any combination of protocol errors.
Remote command:
TRIGger<m>:MILStd:
TYPE on page 1961
Sync Type / Word Type
Triggers on a sync impulse or word type. You can select to trigger on "Command/
Status", on "All" or on "Data" sync pulses / word types.
Remote command:
TRIGger<m>:MILStd:TPSPecifier on page 1969
Remote Terminal Address
The RTA setup consists of the condition and one or two RTA patterns.
In binary format, use the following characters: 1; 0; or X (do not care). To enter the pat-
tern in other formats use the bit pattern editor, see Chapter 13.1.7, "Bit pattern editor",
on page 493.
MIL-1553 (option R&S R
T
O6-K530)