R&S RTO6 - Page 947

Protocol analysis
R&S
®
RTO6
947User Manual 1801.6687.02 ─ 05
Phase ← MRInit ← DLLP MRDLLP conditions
Triggers on a phase state.
Remote command:
TRIGger<m>:
PCIE:DLLP:MULT:PHAS on page 2353
VH FC ← MRInit ← DLLP MRDLLP conditions
Triggers on a virtual hierarchies flow control presence.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:VHFC on page 2354
Mixed Type ← MRInit ← DLLP MRDLLP conditions
Triggers on a mixed type presence.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:MIXT on page 2353
Authorized ← MRInit ← DLLP MRDLLP conditions
Triggers on an authorized state presence.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:AUTH on page 2352
Device/Port Type ← MRInit ← DLLP MRDLLP conditions
Triggers on an device/port type.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:DVPT on page 2353
MRInitFC1/InitFC2/UpdateFC ← DLLP MRDLLP conditions
Specifies the conditions for the multi-root initialization flow control protocol trigger.
PCIe (option R&S RT
O6-K72)