R&S RTO6 - Page 950

Protocol analysis
R&S
®
RTO6
950User Manual 1801.6687.02 ─ 05
Remote command:
TRIGger<m>:
PCIE:
DLLP:FCTL:VCID on page 2352
DLLP PM conditions
Triggers on a specified power management conditions.
PM Type ← DLLP PM conditions
Triggers on a power management type.
Remote command:
TRIGger<m>:PCIE:DLLP:POWM on page 2355
DLLP Vendor conditions
Triggers on a specified vendor conditions.
Vendor Pattern ← DLLP Vendor conditions
Triggers on a vendor pattern.
Remote command:
TRIGger<m>:
PCIE:DLLP:VPAT on page 2355
Ordered set condition
Triggers on an ordered set.
"SKP OS"
Triggers on an SKP ordered sets.
"Training Seq
1/2"
Triggers on a training sequence ordered set.
"Fast Training
Seq"
Triggers on a fast training sequence ordered set.
"Electrical Idle
OS"
Triggers on an electrical idle ordered set that must be send by the
transmitter before it can enter the electrical idle.
"Electrical Idle
Exit OS"
Triggers on an electrical idle exit ordered set.
"Compliance
Pattern"
Triggers on a compliance pattern ordered set.
Remote command:
TRIGger<m>:PCIE:
OSET:TYPE on page 2356
Error Condition PCIe Gen 1/2
Triggers on enabled error condition.
PCIe (option R&S R
T
O6-K72)