R&S RTO6 - Page 1566

Remote control commands
R&S
®
RTO6
1566User Manual 1801.6687.02 ─ 05
CALCulate:MATH<m>:FFT:BANDwidth[:RESolution]:RATio..............................................
1569
CALCulate:
MATH<m>:FFT:BANDwidth[:RESolution][:VALue]........................................... 1569
CALCulate:MATH<m>:FFT:WINDow:TYPE.....................................................................1569
CALCulate:MATH<m>:FFT:FRAMe:ARIThmetics............................................................ 1571
CALCulate:MATH<m>:FFT:FRAMe:COVerage?.............................................................. 1571
CALCulate:MATH<m>:FFT:FRAMe:MAXCount............................................................... 1571
CALCulate:MATH<m>:FFT:FRAMe:OFACtor.................................................................. 1572
CALCulate:MATH<m>:FFT:GATE:COUPling...................................................................1572
TIMebase:RACTime?................................................................................................... 1573
CALCulate:MATH<m>:FFT:GATE:ABSolute:STARt..........................................................1573
CALCulate:MATH<m>:FFT:GATE:ABSolute:STOP.......................................................... 1573
CALCulate:MATH<m>:FFT:GATE:MODE........................................................................1573
CALCulate:MATH<m>:FFT:GATE:RELative:STARt.......................................................... 1574
CALCulate:MATH<m>:FFT:GATE:RELative:STOP...........................................................1574
CALCulate:MATH<m>:FFT:GATE:ZCOupling..................................................................1574
CALCulate:MATH<m>:FFT:GATE[:STATe]...................................................................... 1575
CALCulate:MATH<m>:FFT:MAGNitude:LEVel.................................................................1575
CALCulate:MATH<m>:FFT:MAGNitude:RANGe.............................................................. 1575
CALCulate:MATH<m>:FFT:MAGNitude:SCALe...............................................................1575
CALCulate:MATH<m>:FFT:PHASe:SCALe..................................................................... 1577
CALCulate:MATH<m>:FFT:PHASe:SUPPression............................................................ 1577
CALCulate:MATH<m>:FFT:PHASe:THReshold............................................................... 1577
CALCulate:MATH<m>:FFT:PHASe:UNWRap..................................................................1577
CALCulate:MATH<m>:FFT:COUPled:WITH<1..8>...........................................................1578
CALCulate:MATH<m>:FFT:LOGScale <XAxisMode>
Defines the scaling method for the frequency (x-)axis of the spectrogram.
This command is only available if option R&S RTO6-K37 is installed.
Suffix:
<m>
.
1..8
Parameters:
<XAxisMode> LIN | LOG
LOG
Logarithmic scaling
LIN
Linear scaling
*RST: LIN
Usage: Asynchronous command
CALCulate:MATH<m>:FFT:STARt <StartFreq>
Defines the start frequency of the displayed frequency span.
Suffix:
<m>
.
1..8
math waveform
Spectrum analysis