R&S RTO6 - Page 961

Protocol analysis
R&S
®
RTO6
961User Manual 1801.6687.02 ─ 05
Remote command:
SEARch:
TRIGger:PCIE:
DLLP:FCTL:VCID on page 2369
DLLP PM conditions
Searches for a specified power management conditions.
PM Type ← DLLP PM conditions
Searches for a power management type.
Remote command:
SEARch:TRIGger:PCIE:DLLP:POWM on page 2372
DLLP Vendor conditions
Searches for a specified vendor conditions.
Vendor Pattern ← DLLP Vendor conditions
Searches for a vendor pattern.
Remote command:
SEARch:TRIGger:PCIE:DLLP:VPAT on page 2373
Ordered set condition
Searches for the enabled ordered sets.
"SKP OS"
Searches for an SKP ordered sets.
"Training Seq
1/2"
Searches for a training sequence ordered set.
"Fast Training
Seq"
Searches for a fast training sequence ordered set.
"Electrical Idle
OS"
Searches for an electrical idle ordered set that must be send by the
transmitter before it can enter the electrical idle.
"Electrical Idle
Exit OS"
Searches for an electrical idle exit ordered set.
"Start of data
sequence OS"
Available for PCIe "Generation" = " Gen 3 (8 Gbit/s)"
Searches for a start of data sequence order set.
"Compliance
Pattern"
Searches for a compliance pattern ordered set.
Remote command:
SEARch:
TRIGger:PCIE:
OSET:COMP on page 2375
SEARch:TRIGger:PCIE:OSET:EIDE on page 2375
SEARch:TRIGger:PCIE:OSET:EIDL on page 2375
SEARch:TRIGger:PCIE:OSET:FTS on page 2375
SEARch:TRIGger:PCIE:OSET:SKIP on page 2376
SEARch:TRIGger:PCIE:OSET:TSONe on page 2376
SEARch:TRIGger:PCIE:OSET:TSTWo on page 2376
Error Condition
Searches for enabled error conditions.
PCIe (option R&S R
T
O6-K72)